Please leave your email address, So that we can get in touch with you as soon as possible.
Clarifying the maintenance and upkeep of construction elevators can extend their service life and reduce the incidence of construction elevator failures. The maintenance of construction elevators can be roughly divided into daily maintenance, monthly maintenance, and annual maintenance. Let's take a closer look at: 1. Daily maintenance: 1. Check for wear on the steel wire rope and guide wheel of the counterweight door. 2. Check for oil leakage in the oil pipes, joints, and oil cylinders. 3. Check for any loose travel switches. 4. Jog the construction elevator and check for any abnormal noises.
2、 Monthly maintenance: 1. Check for wear on the roller, bearings, and other load-bearing parts, as well as any loose fasteners. 2. Check for good contact with all travel switches. 3. Check for oil leakage and peeling of the electroplating layer in the oil cylinder. 4. Check for normal operation of the overload protection device. 5. Check for clean circuit connections, firm connections, and normal operation.
3、 Annual maintenance: 1. When the hydraulic oil reaches its level in the construction elevator, does the oil level exceed the suction port? 2. Check if the hydraulic oil has deteriorated. If it has deteriorated, replace the hydraulic oil promptly. 3. Clean the oil circuit system. 4. Check for any abnormalities in other parts.
The equipment uses hydraulic oil tanks, single piece, and rope workbenches. When they rise to the target height, they automatically switch to the reference level and work with light and light. As the main driving force, the lifting car utilizes powerful chains and cable transmissions to ensure the safety of the machine.
In this case, such as in the construction of basements, warehouses, and warehouses, to ensure safety, convenience, and convenience. Before use: 1. Before entering the machine, inspection and testing were conducted, and all technical specifications were carried out according to the design requirements. Users must carefully read the instructions and follow strict measures.
2. Non-professionals are unable to adapt to hydraulic systems, electrical control systems, and platform structures.
3. When installing the platform, it is necessary to carefully check whether the hydraulic, electrical, and structural components are normal. This step also applies to tablet recovery.
4. There is an indicative structure on the platform, a carefully checked boot structure, aimed at ensuring that they can be debugged. Unable to load platform. Staff should ensure that the controlled goods during transportation are not allowed to be overloaded, and overloading is prohibited. It is strictly prohibited to transport people in flammable and hazardous environments. to climb. According to the installation and usage conditions of the goods ladder, different specifications can be selected to achieve a very good combination and more effective use.